User manual

5
SENDER UNIT DESCRIPTIONS
1 5V DC Power Connector
Connect the included 5V DC power supply to this connector.
2 Power Indicator
This LED will turn bright red once the included 5V DC power supply has been
properly connected to the unit and the power supply has been connected to an
available electrical outlet.
3 Locking VGA Port
Connect a VGA source to this port.
4 RS-232 Port
Connect the RS-232 host device to this port.
5 CAT-5 Output Jack
Connects the Sender Unit to the Receiver Unit using a CAT-5 cable.