Owners manual

page | 33
The LED indicators on the Sender and Receiver unit provides basic information on the current
state of the Wireless for HDMI 5 GHz Short Range.
Table 3.1 - Sender unit LED indicators
Status Description
Power Indicator LED is off
• No power supplied to the Sender
unit. Make sure the power supply is
connected to the Sender unit.
Power Indicator LED is solid blue
• Power supplied to the Sender unit.
• Sender unit is linked to Receiver unit.
Power Indicator LED ashes blue (fast)
• Link mode. In this mode,
the Sender unit is attempting to link
with the Receiver unit. The Sender
unit must be registered by the
Receiver unit.
Power Indicator LED ashes blue (slow)
• Register mode. In this mode,
the Sender unit is being registered by
the Receiver unit. Once registered,
the Sender unit will appear in a list
that is stored in the Receiver unit.
See Registering Sender Units (page
16) for more information.
Appendix
LED Indicator Messages