Wireless For UWB EXT-WHDMI User Manual www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone Fax (818) 772-9100 (800) 545-6900 (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday Pacific Time Write To: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen, LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
1 3 Wireless for HDMI Product Placement Guide Wireless for HDMI Product Placement Guide Optimizing the placement of your Wireless for HDMI product can increase performance and ensure that you are getting the best possible range and signal quality. Optimizing the placement of your Wireless for HDMI product can increase performance and ensure that you are getting the best possible range and signal quality.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 7 Receiver Panel Layout 8 Receiver Panel Descriptions 9 Connecting The Wireless for HDMI UWB 10 Operating The Wireless for HDMI UWB 11 Specifications 12 Warranty
INTRODUCTION Congratulations on your purchase of the Wireless for HDMI UWB. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE WIRELESS FOR HDMI UWB • This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C.301 and could subject the operator to serious legal penalties. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received including interference that may cause undesired operation.
FEATURES Features • Real-time, visually lossless HD video compression • Two HDMI inputs and one Component Video / Analog Audio input • Fully HDMI and HDCP compliant • Supports HDMI 1.3 Lip Sync features for source devices • IR Blaster and IR Receiver jacks • Input Selector Switch • 2-ch Audio and PCM @ 32KHz, 44.1KHz, 48KHz supported as well as multichannel compressed 5.
SENDER PANEL LAYOUT Front Panel 1 2 3 4 5 6 7 8 Back Panel 9 10 11 12 13 4 14 15
SENDER PANEL DESCRIPTIONS 1 Power LED Indicator This LED will become active once the included 5V DC power adapter is properly connected. 2 Video LED Indicator This LED will be active while video is actively being transmitted between the sending and receiving units. 3 Link LED Indicator This LED will become active once a solid link has been established between the sending and receiving units.
SENDER PANEL DESCRIPTIONS (CONTINUED) 10 5V DC Power Input Connect the included 5V DC power supply to this input and the power outlet. 11 HDMI 1 Input Connect a HDMI/DVI source to this input. 12 HDMI 2 Input Connect a HDMI/DVI source to this input. 13 Component Video Input Connect a component video source to this input. 14 Stereo Analog Audio Input Connect the stereo analog audio source that will be used when the component source is selected.
RECEIVER PANEL LAYOUT Front Panel 1 2 3 Back Panel 4 5 7 6 7 8
RECEIVER PANEL DESCRIPTIONS 1 Power LED Indicator This LED will become active once the included 5V DC power adapter is properly connected. 2 Video LED Indicator This LED will be active while video is actively being transmitted between the sending and receiving units. 3 Link LED Indicator This LED will become active once a solid link has been established between the sending and receiving units.
CONNECTING THE WIRELESS FOR HDMI UWB How to Connect the Wireless for HDMI UWB 1. Connect the source devices to the Wireless for HDMI UWB sender inputs. Available inputs are as follows: HDMI 1 Connect a HDMI/DVI (with a DVI to HDMI adapter) source device to the HDMI 1 input port using a user supplied HDMI cable. HDMI 2 Connect a second HDMI/DVI (with a DVI to HDMI adapter) source device to the HDMI 2 input port using a user supplied HDMI cable.
OPERATING THE WIRELESS FOR HDMI UWB Auto Switching Feature The Auto Switching feature on the Wireless for HDMI will monitor both of the HDMI input ports and will automatically switch when it detects that an a HDMI source’s power has been turned on. The memory feature will automatically return to the last viewed source when the unit detects that an HDMI source has been turned off.
SPECIFICATIONS Frequency band range ...................................................................... 3.1 - 4.8 GHz Resolutions ............. 480i, 480p, 720p, 1080i and 1080p@24Hz, 25Hz, and 30Hz HDMI Version ..................................................................... HDMI v1.2a Compliant CEC Compliancy ......................... Consumer Electronics Control (CEC) compliant Compression Type ........................... ADI JPEG 2000 visual lossless compression Operating temperature ...........
WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.
Rev A4 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefen.com Pb This product uses UL listed power supplies. fax: 818-772-9120 support@gefen.
