Manualshelf

User's Guide

ManualsBrandsGefen ManualsElectronicsWireless USB2.0 Extender
12345678910
Wireless Hub and USB Dongle User Guide R1.10
Page 10 Wisair Wireless USB Hub Reference Design
3 Installation
3.1 System Requirements
The minimum requirements for running the Gefen Wireless Hub connection software on a PC
are as follows:
§ No previous Gefen Wireless Hub software version installed. If you need to uninstall a
previous version of the software, use the uninstall utility under
Start>Programs>Wireless Hub
§ One or more available high speed (EHCI controller) USB 2.0 ports
§ Windows XP with SP2
§ 4 MB of free disk space
3.2 PC Software Installation
Note: Do not attach the USB Dongle before the GUI application is installed
The software and driver installation is performed in three stages:
1. The GUI application and USB drivers are installed on the PC,
no hardware is connected yet.
2. The USB dongle is connected to the high speed USB 2.0 port in the PC and Windows
must recognize the dongle and each of the drivers that it uses.
3. The Wireless Hub is powered, associated with the USB Dongle, and its corresponding
driver is recognized by Windows.
3.2.1 Install the USB Drivers and GUI Application
1. Ensure that the Wireless Hub is switched off and the USB Dongle is detached from the
PC.
2. Run the Setup_ver_XX_XX.exe Gefen Setup Launcher program.
3.2.2 Connecting the USB Dongle and Registering the Drivers
1. Connect the Gefen USB Dongle to the high speed PC USB port. The system will install
the drivers for the connected dongle automatically.
2. Hardware device recognition notifications are displayed in bubble help messages above
the system tray. Wait for the final message – "your hardware is installed and ready for
use" before continuing.
3.2.3 Connecting the Wireless Hub
1. Ensure that the Wireless Hub is switched off.
2. Open the Wireless Hub Connection Status screen (double-click the Connection Manager
tray icon).
3. In the Wireless Hub Details (Pairing) section, enter the Product ID # provided on a
sticker on the bottom of the Wireless Hub. (There are six pairs of character/digit
combinations in the product ID).