User's Guide

Wireless Hub and USB Dongle User Guide R1.10
Wisair Wireless USB Hub Reference Design Page 13
4.3 Configuration Properties
The USB Dongle hardware properties screen provides direct access to the dongle hardware
configuration.
To open the properties screen, right click on the Gefen icon and select properties from the
context menu.
The following table explains the properties that can be configured or viewed:
Property Description
Connection Status
Operating State Disabled/Disconnected/Connected
Signal Strength 0-100%
Transmit Rate Select Auto/480/400/320/200/160/106.7/80/53.3 Mbps
Channel Select Auto Detect /A/B/C/D/E (see
Table 1: Wireless channel selection)
Current Channel A/B/C/D/E (see
Table 1: Wireless channel selection)
Wireless Hub Details (Pairing)
Product ID # Enables the registration of the Wireless Hub Product ID# in order to allow
association/connection with that hub.
Register/Un-Register Registers (associates) or Un-Registers (disassociates) the Wireless Hub of the
given Product ID #.
USB Dongle Status
Reset Resets the connection/disassociates Wireless Hub from Host and restarts scanning
Disable/Enable Turns USB dongle off to save PHY power
Packets Sent/Packets
Received
Packets Sent (by USB Dongle)
Packets Received (from Wireless Hub)
USB Dongle Details
Description USB Dongle
Product ID Unique hardware identification number
Firmware Version Host firmware version
Driver Version Wireless Hub PC driver version