User manual

7
PANEL DESCRIPTIONS
Back Panel
1 RS-232 Serial Port
Connects to the RS-232 control device. The 3GSDI to HD Scaler can be
controlled remotely using this port. See page 22 for more information.
2 USB Port
This high-speed USB port is used to update the fi rmware on the Scaler.
3 S/PDIF Output
Connect a coax cable from this port to an amplifi er or other A/V device. Up to
7.1 channels of digital audio are supported.
4 3GSDI In 1
Receives incoming SDI source signal.
5 3GSDI Loop Output 1
Allows monitoring of SDI source signal on Input 1. No scaling is performed.
6 3GSDI In 2
Receives incoming SDI source signal.
7 3GSDI Out 2
Allows monitoring of SDI source signal on Input 2. No scaling is performed.
8 HDMI Output
Connect an HDTV display to this output.
9 Power Switch
Turn the power ON or OFF using this switch.
10 110 / 220 V AC Power Receptacle
Connect the included AC power cord from this receptacle to an available
electrical outlet.