User manual

16
MENU SYSTEM
Input > Link Confi guration
The Link Confi guration must be set to correctly recognize the type of input signal.
Many dual-link signals can be interpreted as single link. The input source must
be connected fi rst or the Scaler will not allow link confi guration to take place. The
selected link confi guration appears marked in the list of choices. Incompatible
choices will cause the Single Link mark to remain selected without an operation
being performed.
• Single Link
• Dual Link YCbCr
• Dual Link RGB
• Dual Link 1080p/576p/480p
Input > Clean Aperture
The clean aperture parameters allow an area within the production aperture to be
defi ned. The maximum clean aperture size that may be defi ned and processed
by the 3GSDI to HD Scaler is 2048 pixels by 2048 lines. The minimum clean
aperture size is 0 pixels by 0 lines.
Input > Film Mode
Automatically detects repeated fi eld sequences present in interlaced signals,
such as: 50 Hz or 60 Hz fi eld sequences (no repeated fi elds), 60 Hz 3:2 pull-
down, including broken / edited sequence detection, 60 Hz 2:2: pull-down, 50 Hz
2:2 pull-down, and Freeze frame.
• Enable
• Disable
Input > Audio
Selects the number of audio channel(s) to be extracted from the video input.