User manual

RS-232 SERIAL CONTROL

Function Description

#PATTERN Selects the test pattern to display on the output

#REMOTECHAN Sets the IR Remote Channel on the Scaler

#RESTORE Restores all of the default parameters (factory defaults)

#SAVE Saves the current parameters in the PROM

#SIZEPOS Sets the size and position of the output signal

#THROUGH Deﬁ nes a sub-window that is centered on the screen

#VERSION Returns the version of ﬁ rmware, kernel, and conﬁ guration

#ASPECT Function

The #ASPECT function sets the aspect ratio.

Syntax:

#ASPECT param1

Parameters:

param1 IR channel [1 - 5]

Value Meaning

1 Full Screen

2 Letter / Pillar Box

3 Panoramic

4 Extract (Uses default value)

5 Through (Uses default Value)

Notes:

If the Extract or Through mode is selected, the default values are set. To modify

the parameters for Extract or Through mode refer to these functions in this

manual.