User manual

12
IR REMOTE CONFIGURATION
Resolving IR Code Confl icts
In the event that IR commands from other remote controls confl ict with the
supplied IR remote control unit, changing the remote channel will alleviate this
issue. The IR remote control unit has a bank of DIP switches for setting the
remote IR channel.
The DIP Switch bank on the IR remote control unit is located underneath the
battery cover.
It is important that the IR channel selected on the remote, match the IR channel
on the DVI to HDSDI Pro Scaler for proper operation. For example, if you set
both DIP switches on the remote to the down position (toward the “1” and “2”), IR
channel 0, you must set the DVI to HDSDI Pro Scaler to use IR channel 0.
1 2
1 2
1 2
1 2
Remote Channel 2:
Remote Channel 0:
Default
Remote Channel 1:
Remote Channel 3:
DIP Switches
See page ## for information on how to change the IR channel on the DVI to
HDSDI Pro Scaler.