User manual

26
RS-232 CONTROL
The GefenPRO DVI to HDSDI Scaler Pro can accept commands through the
RS-232 serial communications port located on the rear panel. RS-232 can be
used to control many of the product’s features which are also controlled using
the IR Remote Control Unit. Refer to the HDSDI RS-232 Serial Communications
Manual on the Gefen web site for details on using the RS-232 interface.
54321
9876
12345
6789
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
RS-232 Settings
Bits per second ........................................................................................... 115200
Data bits ............................................................................................................... 8
Parity ............................................................................................................. None
Stop bits ................................................................................................................1
Flow Control .................................................................................................. None