User manual

CONNECTING THE HDMI TO 3GSDI SCALER

How to Connect the HD to 3GSDI Scaler

1. Connect a HI-Def source to the HDMI In port on the back of the HDMI to

3GSDI Scaler using the included HDMI cable.

2. Connect the Out A port on the back of the Scaler to the 3GSDI destination.

The 3GSDI destination cab be mirrored by connecting a cable from the

Out B port.

In order to output dual link 1080p, when using HD-SDI, both Out A

and Out B must be connected, simultaneously, to the destination.

3. Connect a coax cable from the S/PDIF output to an external ampliﬁ er.

4. Connect the included AC power cord to the power receptacle on the rear

panel of the HDMI to 3GSDI Scaler and connect the opposite end of the

cable into an available electrical outlet.

5. Power the HDMI to 3GSDI Scaler by pressing the power switch on the rear

of the unit.

Wiring Diagram for the HDMI to 3GSDI Scaler

Audio Receiver

3G-SDI Display

Clock Generator

HDMI Source

Scaler

GEF-HD-2-3GSDIS

0:0 0:0 0

SDI CABLE

COAX AUDIO CABLE

HDMI CABLE

Attention: This product should always be connected to a grounded

electrical socket.