User manual

15
MENU SYSTEM
Input Menu
Input > Input Video Format
Selects the resolution and timing of the input format. By default, this is set to
Auto Detect which automatically senses the resolution and timing of the input
signal. The available resolutions under this menu are in SD and HD format.
Input > Graphic Format
Selects the resolution and timing of the input format. By default, this is set to
Auto Detect which automatically senses the resolution and timing of the input
signal. The available resolutions under this menu are in VESA format.
Input > Clean Aperture
Allows adjustment of the input signal position. The clean aperture parameters
allow an area within the production aperture to be defi ned. The minimum clean
aperture size is 0 pixels by 0 lines.
• Horizontal Size
Adjusts the horizontal size of the image.
• Vertical Size
Adjusts the vertical size of the image.
• Horizontal Position
Adjusts the horizontal position of the image.
• Vertical Position
Adjusts the vertical position of the image.
Input > Film Mode
Automatically detects repeated fi eld sequences present in interlaced signals,
such as: 50 Hz or 60 Hz fi eld sequences (no repeated fi elds), 60 Hz 3:2 pull-
down, including broken / edited sequence detection, 60 Hz 2:2: pull-down, 50 Hz
2:2 pull-down, and Freeze frame.
• Enable
• Disable