User manual

16
MENU SYSTEM
Input > Remote Channel
This option changes the IR channel of the HDMI to 3GSDI Scaler to one of 4
different settings between 0 and 3. When the remote channel of the Scaler is
changed, the DIP switches in the eight-button remote must be changed to the
corresponding IR channel in order to operate the Scaler (see IR Remote Control
Installation on page 10 for more information).
Input > Input Color Range
The RGB output color range may be changed/set to limited (16-235) or to full
(0-255).
• Auto
Uses the color range of the input signal.
• 16 - 235 (Pass through)
The input color range will be compressed from full-range (0 - 255) to limited-
range.
• 0 - 255 (Compress)
The output color range will be expanded from limited-range (16 - 235) to full-
range (0 - 255).
Picture Menu
Picture > Image Color
Allows individual adjustment of the Red, Green, and Blue color components,
brightness, and Black Level of the image.
• Red
Adjusts the saturation of the Red color component.
• Green
Adjusts the saturation of the Green color component.
• Blue
Adjusts the saturation of the Blue color component.
• Brightness Red
Adjusts the brightness of the Red color component.
• Brightness Green
Adjusts the brightness of the Green color component.
• Brightness Blue
Adjusts the brightness of the Blue color component.
• RGB/Y Output Offset
Adjusts the black level of the image.