User manual

24
RS-232 SERIAL CONTROL
#BRIGHT Function
The #BRIGHT function sets the brightness value for a specifi c color.
Syntax:
#BRIGHT param1 param2
Parameters:
param1 Color name [0 - 2]
Value Meaning
0 Red
1 Green
2 Blue
param2 Color value [0 - 100]
Notes:
The default value of the Color value is 50.
#CLEANAPER Function
The #CLEANAPER function sets the clean aperture level for each position and
size.
Syntax:
#CLEANAPER param1 param2 param3 param4
Parameters:
param1 Horizontal size [1 - 100]
param2 Vertical size [1 - 100]
param3 Horizontal position [1 - 100]
param4 Vertical position [1 - 100]
Notes:
The default value of the Color value is 50.