User manual

Table Of Contents

APPENDIX

105

Firmware Update Procedure

1. Makesurethe4x4MatrixforHDMIispowered.

2. ConnectanEthernetcablebetweenthematrixandthecomputerrunningthe

WebGUI.

3. GototheCongurationtabintheWebGUIandclicktheBrowse...buttonunder

theSystem Congurationsection.



4. SelectthermwareleandclicktheUpdatebutton

5. Thematrixwillpromptyoutoverifythatyouwanttooverwritethecurrentrmware.

ClicktheOKbuttonontheWebGUIdialogtobeginuploadingthermwarele.

6. Oncethermwarelehasbeenuploaded,thematrixwillverifythermwarecontent.

Thefront-panelLCMwilldisplaythefollowingifthermwarepasses:



7. Afterthermwareleintegrityhasbeenveried,thematrixwillbegintheupgrade

procedure.Theupgradeprogresswillbedisplayedinthefront-panelLCM.



8. Afterthematrixhasbeenupdated,theunitwillautomaticallyinitiateacountdownto

reboot.TheLCMwilldisplaythefollowingmessage:



9. Afterthematrixreboots,thermwareupgradeprocesswillbecomplete.

CONTENT CHECK:

PASS

-F/W UPDATE-

FINISHED

REBOOT IN 52 SEC