User manual

RS-232 / IP CONTROL
39
#set_http_port Command
The#set_http_portcommandsetstheWebserverlisteningport.Thedefaultport
settingis80.Alsoseethe#show_http_portonpage45.


Syntax:
#set_http_port param1


Parameters:
param1 Port    [0...1024]
Notes:
Thematrixmustberebootedafterexecutingthiscommand.
Example:
#set_http_port 80
HTTP Communication Port 80 Is Set. Please Reboot The Unit.