User manual

50
RS-232 / IP CONTROL
#snetmask Command
The#snetmaskcommandsetstheIPnetworksubnetmask.Dot-decimalnotationmustbe
usedwhenspecifyingtheIPnetworkmask.Thedefaultsubnetmaskis:255.255.255.0

Syntax:
#snetmask param1


Parameters:
param1 Subnetmask

Notes:
Thematrixmustberebootedafterexecutingthiscommand.

Syntax:
#snetmask 255.255.0.0
NetMask Address 255.255.0.0 Is Set. Please Reboot The Unit.