User manual

RS-232 / IP CONTROL
54
#save_preset Command
The#save_presetcommandsavesthecurrentroutingstatetothespeciedpreset.
Anymaskedoutputswillalsobesavedaspartofthecurrentroutingstate.

Syntax:
#save_preset param1


Parameters:
param1 Preset    [1...8]
Example:
#save_preset 1
CURRENT ROUTING STATE IS SAVED TO PRESET/INPUT 1
#set_bank_name Command
The#set_bank_namecommandnamesthespeciedEDIDbank.

Syntax:
#set_bank_name param1


Parameters:
param1 Bank    [1...8]
param2 Name    [20charsmax.]
Example:
#set_bank_name Dell_30
Dell_30 NAME IS ASSIGNED TO BANK 1