User manual

RS-232 / IP CONTROL
59
r Command
Thercommandroutesthespeciedinputtothespeciedoutputs.Donotprecedether
commandwiththe“#’symbol.
Syntax:
r param1 param2[...param9]

Parameters:
param1 Input    [1...4]
param2 Outputs    [1...4]
Notes:
Ifparam2=0,thenthespeciedinputisroutedtoalloutputs.Seethescommandonthe
followingpage.
Examples:
r 4 1 2 3
INPUT 4 IS SET TO OUTPUTS 1, 2, 3
r 2 0
INPUT 4 IS SET TO ALL OUTPUTS.