User manual

RS-232 / IP CONTROL
62
#show_fw Command
The#show_fwcommanddisplaysthecurrentrmwareversionoftheMatrix.

Syntax:
#show_fw


Parameters:
None

Example:
#show_fw
FIRMWARE VERSION = GEF-HDFST-444-4ELR v3.0K
#show_hdp Command
The#show_hpdcommanddisplaystheHPD(Hot-PlugDetect)statusofthespeciedout-
put.Theunderscorecharacter(“_”)mustbeincludedwhentypingthecommandname.

Syntax:
#show_hpd param1


Parameters:
param1 Output    [1...4]

Notes:
Iftheoutputhasbeenrenamedusingthe#set_output_namecommand,thenthenamethat
isassignedtotheoutputwillbeincludedinparentheses.
Examples:
#show_hpd 2
HPD OF OUTPUT 2(Sony_XBR) IS LOW