User manual

RS-232 / IP CONTROL
65
n Command
Thencommanddisplaysthecurrentinput-outputroutingstateforthespeciedoutput.
Donotprecedethiscommandwiththe“#’symbol.

Syntax:
n param1


Parameters:
param1 Output    [1...4]

Notes:
Ifparam1 = 0,thentheroutingstatusforalloutputswillbedisplayed.
Inthesecondexample,n0returnstheroutingstateforallOutputs.
Examples:
Thereturnresultisreadaspairsofnumbers.Therstnumberistheoutputandthe
secondnumberistheinput.Intheexamplebelow,n 1returnstheroutingstatefor
Output1.“12”meansthatOutput1isroutedtoInput2:
n 1
12
n 0
12223242
Inthesecondexample,above,“12223242”isreadas:
Output1>Input2
Output2>Input2
Output3>Input2
Output4>Input2