User manual

66
FST
Command Description
#fst_fast SetsthespeciedinputstoFastswitchingmode
#fst_slow SetsthespeciedinputstoSlowswitchingmode
#show_fst Displaysthecurrentswitchingmodeforthespeciedinput
#fst_fast Command
The#fst_fastcommandsetsthespeciedinputstoFastswitchingmode.

Syntax:
#fst_fast param1


Parameters:
param1 Input    [1...4]

Notes:
Ifparam1 = 0,thenallinputswillbesettoFastswitchingmode.

Example:
#fst_fast 1
INPUT 1 IS SET TO FST FAST MODE
RS-232 / IP CONTROL
NOTE: Seepage17formoreinformationontheFSTfeature.