User manual

68
RS-232 / IP CONTROL
Masking
Command Description
#echo Enables/disablesRS-232feedback
#fadefault Resetsthematrixtofactorydefaults
#hdcp DisablesHDCPonthespeciedinput
#hpd_pulse CyclestheHPDlineonthespeciedinput
#lock_edid LocksthelocalEDIDwhenpoweringthematrix
#mask Masksthespeciedoutputs
#power Powersthematrixonoroff
#reboot Rebootsthematrix
#set_edid CopiesEDIDdatabetweeninputs,outputs,andbanks
#set_ir SetstheIRchannelofthematrix
#show_hdcp DisplaystheHDCPstatusonthespeciedinput
#show_ir DisplaysthecurrentIRchannelofthematrix
#show_mask Displaystheoutputmaskingstatus
#show_out_colordpt Showsthehighestcolordepthsupportedbythedisplay
basedontheEDID
#show_out_res Showsthehighestresolutionsupportedbythedisplay
basedontheEDID
#unmask Unmaskstheselectedoutputs