User manual

#fadefault Command
The#fadefaultcommanddisablestheEDIDlockstate,setsthedefaultroutingstate(1-1,
2-2,3-3,etc.),andresetstheinputandoutputnamestothedefaultnames(e.g.Output1,
Input1).

Syntax:
#fadefault


Parameters:
None

Example:
#fadefault
MATRIX WAS RESET TO FACTORY DEFAULTS
INPUT 1 IS ROUTED TO OUTPUT 1
INPUT 2 IS ROUTED TO OUTPUT 2
INPUT 3 IS ROUTED TO OUTPUT 3
INPUT 4 IS ROUTED TO OUTPUT 4
LOCAL ECHO IS ON
ALL OUTPUTS ARE UNMASKED
ALL INPUTS ARE SET TO FST FAST MODE
IP ADDRESS IS: 192.168.1.72
GATEWAY ADDRESS IS: 192.168.1.254
NET MASK ADDRESS IS: 255.255.255.0
HTTP Communication Port 80 Is Set.
Telnet Communication Port 23 Is Set.
Telnet Interace Password Is Disable
TELNET User Name Admin Is Set.
...
...
GEF-HDFST-444-4ELR v3.0K
INPUT 1 IS ROUTED TO OUTPUT 1
INPUT 2 IS ROUTED TO OUTPUT 2
INPUT 3 IS ROUTED TO OUTPUT 3
INPUT 4 IS ROUTED TO OUTPUT 4
70
RS-232 / IP CONTROL