User manual

72
RS-232 / IP CONTROL
#hpd_pulse Command
The#hpd_pulsecommandcyclestheHPDlineonthespeciedinput.Issuingthis
commandisidenticaltophysicallydisconnectingandreconnectingthecablebetweenthe
sourceandthematrix.
Syntax:
#hpd_pulse param1

Parameters:
param1 Input    [1...4]
Notes:
Setparam1=0tocycletheHPDlineonallinputs.

Examples:
#hpd_pulse 1
HPD PULSE HAS BEEN SENT TO INPUT 1
#hpd_pulse 0
HPD PULSE HAS BEEN SENT TO ALL INPUTS