User manual

75
RS-232 / IP CONTROL
#power Command
The#powercommandtogglesthepowerstateonthematrix.
Syntax:
#power param1

Parameters:
param1 Value    [0...1]
Value Description
0 PowermatrixOFF
1 PowermatrixON
Notes:
Eachtimethematrixispowered,thecurrentroutingstatuswillbeechoedtotheterminal.
Examples:
#power 0
MATRIX IS OFF
#power 1
MATRIX IS ON
INPUT 1 IS ROUTED TO OUTPUT 1
INPUT 2 IS ROUTED TO OUTPUT 2
INPUT 3 IS ROUTED TO OUTPUT 3
INPUT 4 IS ROUTED TO OUTPUT 4