User manual

79
RS-232 / IP CONTROL
#set_ir Command
The#set_irsettheIRchannelforthematrix.TheassociatedDIPswitchsettingsfortheIR
remotecontrolunitarereturned.Seepage9fordetailsonsettingtheIRchannelfortheIR
remotecontrol.

Syntax:
#set_ir param1


Parameters:
param1 Channel    [0...3]

Example:
#set_ir 0
IR CHANNEL IS SET TO CHANNEL 0
#show_ir Command
The#show_irdisplaysthecurrentIRchannelforthematrix.

Syntax:
#show_ir


Parameters:
None

Example:
#show_ir
CURRENT IR CHANNEL IS: 0