User manual

81
RS-232 / IP CONTROL
#show_mask Command
The#show_maskcommanddisplaysthemaskstatusforthespeciedoutput.

Syntax:
#show_mask param1


Parameters:
param1 Output    [1...4]

Example:
#show_mask 4
OUTPUT 4(OUTPUT4) IS UNMASKED
#show_out_colordpt Command
The#show_out_colordptcommanddisplaysthehighestcolordepthsupportedbythe
specieddisplaybasedontheEDID.Theunderscorecharacters(“_”)mustbeincluded
whentypingthecommandname.

Syntax:
#show_out_colordpt param1


Parameters:
param1 Output    [1...4]
Notes:
Ifnodisplay(sink)signalisdetected,thenthe#show_out_colordptcommandwill
returnthefollowing:
NO SIGNAL

Example:
#show_out_colordpt 1
8 BITS HDMI