User manual

The IR remote control will allow the user to select which source will be routed to
which output. Each of the two (2) outputs are assigned a group of four buttons
which correspond to the four source inputs. Please use the information below
when selecting the desired source for each display.
Table of IR Remote Commands
for the 4x2 Matrix for HDMI
RMT-8MIR Source Display
111
221
331
441
512
622
732
842
IR REMOTE DESCRIPTION
RMT-8MIR button Source Display
622
Example: In the above example, if button 6 on the IR remote is pressed, the
source connected to HDMI In 2 will be routed to the Display connected to HDMI
Out 2.
9