User manual

12
How to change the IR channel
Use the following procedure to set the proper IR channel on the 4x2 Matrix for
HDMI.
1 Press and hold the Out 1 button for 5 seconds to enter IR channel selection
mode. The bank of blue LED indicators will now display the currently
selected IR channel.
2 Press the Out 1 button to cycle through each IR channel. The currently
selected IR channel will be indicated by a fl ashing blue LED. IMPORTANT:
The selected IR channel must be the same as the IR channel set on the IR
Remote (page 11). Refer to the table below for setting the IR channel.
3 Once the proper IR channel has been selected, press and hold the Out 1
button to confi rm and exit IR channel selection mode. The currently selected
input source will now be indicated.
IR Channel Table
Input LED IR Channel
11
22
33
44
CHANGING THE IR CHANNEL