User manual

14
MENU SYSTEM
Output Menu
To access the Output Menu, press the Menu button. Use the + or - buttons
to highlight the Output Menu icon. Press the Menu button to enter the Output
Menu. Use the + or - buttons to select the desired output resolution. Press the
Enter button to enable the selected output resolution. Use the + or - buttons
to select the Exit option to exit the Option Menu and return control to the Main
Menu.
VGA 480i 576i WXGA
SVGA 480p 576p WSXGA
XGA 720p60 720p50 WUXGA
SXGA 1080i60 1080i50
UXGA 1080p60 1080p50 2K
1080p-1 1080p-2 1080p-3
Native* Exit
* The Native option will select the native resolution of the connected display based
on the EDID from the display.
The Output Menu also contains three frame rate conversion modes:
• 1080p-1 : 1080p 24/50/60 No frame rate conversion.
• 1080p-2 : 1080p 24/60 Converts all frame rates (except 24) to 60.
• 1080p-3 : 1080p 24/50 Converts all frame rates (except 24) to 50.
If a resolution that is not supported by the display is selected, then the on-
screen Menu will no longer be visible. To correct this, press the OUTPUT
button on the IR Remote Control Unit and cycle through the output
resolutions until a supported mode is displayed.
Exit
Exits the Output Menu and returns control to the Main Menu.