Owners manual

page | 3
Page Title
Getting Started
Introduction
ID Name Description
1 Out 1, Out 2 Connect an Ultra HD display to each of
these ports using HDMI cables. Locking
HDMI cables can be used on each port.
2 FST (Fast / Slow) Use this slider switcher to switch between
Fast and Slow FST (Fast Switching
Technology) modes. See Setting the
Switching Mode (page 8) for more
information on using FST mode.
3 Audio (2ch / Multi-ch) Use this slider switcher to switch between
2CH and Multichannel audio on the output.
See Setting the Audio Channel Mode (page
10) for more information on using this
feature.
4 EDID (Int / Ext) Use this slider switch to switch between
internal (Int) and external (Ext) EDID
modes. See Setting the EDID Mode (page
12) for more information.
5 In Connect the included HDMI cable from the
Ultra HD source to this HDMI port.
6 USB Used for upgrading the rmware.
See Firwmare Upgrade Procedure (page
17) for more information.
7 5V DC Connect the included 5V DC power supply to
this locking power receptacle.
8 Power This LED indicator will glow bright blue
when the included 5V DC power supply
is connected between the splitter and an
available electrical outlet.
9 Mounting Holes Use these holes to mount the 4K Ultra HD
1:2 Splitter for HDMI to a at surface.
See Surface Mount Instructions (page 16)
for more information.