Owners manual

page | 8
Basic OperationBasic Operation
Setting the Switching Mode
Basic OperationBasic Operation
Fast Switching Technology
Fast Switching Technology (FST) is a Gefen software implementation for HDMI products.
FST was created to improve the lengthy HDMI authentication process, based on the HDMI
and HDCP speciî‚¿cations.
FST provides quicker audio/video source switching and greatly improves the overall audio/
video system behavior and performance when more than one HDTV display is used in the
system setup.
FST allows connecting / disconnecting or turning ON / OFF of HDTV displays without
having these activities affect other Hi-Def sources routed to any other HDTV display in the
same system.
Using Fast Mode
Use fast switching mode to improve performance when connecting / disconnecting Hi-Def
sources, and powering ON / OFF HDTV displays.
1. Disconnect the power supply from the 4K Ultra HD 1:2 Splitter for HDMI.
2. Set the FST switch to the Fast (up) position.
3. Reconnect the power supply to the splitter.
If the FST switch is moved from the Slow position to the Fast position while the
splitter is powered, then power-cycle the splitter by disconnecting and reconnecting
the power supply in order for the change to take effect.
FAST SWITCHING TECHNOLOGY
5V DCUSB
Int
Ext
EDID
Power
Out 1 Out 2
In
Audio
FST
2ch
Multi-ch
Fast
Slow
4K Ultra HD
1:2 Splitter
for HDMI
Fast position