60Hz, 4:2:0 1:8 Splitter for HDMI GTB-HD4K2K-148C-BLK User Manual Release A2
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this product near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Warranty Information Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.
Contacting Gefen Technical Support Technical Support (818) 772-9100 (800) 545-6900 8:00 AM to 5:00 PM Monday - Friday, Pacific Time Fax (818) 772-9120 Email support@gefen.com Web http://www.gefen.com Mailing Address Gefen, LLC c/o Customer Service 20600 Nordhoff St. Chatsworth, CA 91311 Product Registration Register your product here: http://www.gefen.com/kvm/Registry/Registration.
Operating Notes • The Gefen Syner-G Software Suite is a free downloadable application from Gefen that provides network configuration assistance and automatic download and installation firmware upgrades for this product. Always make sure that the 4K Ultra HD 1:8 Splitter for HDMI is running the latest firmware. • The 4K Ultra HD 1:8 Splitter for HDMI has advanced EDID management features to ensure complete compatibility with all sources and display devices.
Features and Packing List Features • Simultaneously displays an Ultra Hi-Def source on up to eight Ultra HD displays • Specifically designed to support 10 layers of splitting/cascading in large video distribution and signage applications, supporting hundreds of displays • Supports resolutions up to 4K DCI (4096 x 2160 at 24 and 30 Hz), 4K Ultra HD (3860 x 2160 at 60 Hz, 4:2:0 color space),1080p Full HD, and 1920x1200 WUXGA • Supports 12-bit Deep Color at 1080p • 3DTV pass-through • Lip Sync pass-
Packing List The 4K Ultra HD 1:8 Splitter for HDMI ships with the items listed below. If any of these items are not present in your box when you first open it, immediately contact your dealer or Gefen. • • • • 1 x 4K Ultra HD 1:8 Splitter for HDMI 1 x 6 ft.
Table of Contents 1 Getting Started Introduction............................................................................................................ 2 Panel Layout.................................................................................................. 2 Installation.............................................................................................................. 4 Connecting the 4K Ultra HD 1:8 Splitter for HDMI......................................... 4 Sample Wiring Diagram.
60Hz, 4:2:0 1:8 Splitter for HDMI 1 Getting Started
Introduction Page Title Getting Started Panel Layout 9 1 2 Out 1 Out 5 Out 1 Out 5 Out 2 Out 6 Out 2 Out 6 Out 3 Out 7 Out 3 Out 7 Out 4 Out 8 Out 4 Out 8 Fast Slow FST 4K Ultra HD 1:8Ultra Splitter 4K HD forSplitter HDMI 1:8 for HDMI Fast Slow 3 FST 2ch Multi-ch Audio 2ch Multi-ch 4 Audio Int Ext EDID 5 Int Ext 8 Power EDID In USB In Power 5V DC USB 5V DC 6 7 page | 2 9
Getting Started Introduction Page Title ID Name Description 1 Out 1 - Out 8 Connect an Ultra HD display to each of these ports using HDMI cables. Locking HDMI cables can be used on each port. 2 FST (Fast / Slow) Use this slider switcher to switch between Fast and Slow FST (Fast Switching Technology) modes. See Setting the Switching Mode (page 8) for more information on using FST mode. 3 Audio (2ch / Multi-ch) Use this slider switcher to switch between 2CH and Multichannel audio on the output.
Getting Started Installation Page Title Connecting the 4K Ultra HD 1:8 Splitter for HDMI 1. Use the included HDMI cable to connect the Ultra Hi-Def source to the In port on the splitter. 2. Connect up to eight Ultra Hi-Def displays to the splitter using ports Out 1 - Out 8. 3. Connect the included 5V DC locking power supply to the power receptacle on the splitter. Do not overtighten the locking power connector. 4.
Getting Started Installation Cascading Splitters The 4K Ultra HD 1:8 Splitter for HDMI provides the capability to “cascade” (daisy-chain) up to 10 splitters. This feature not only provides you with the means to cascade multiple 4K Ultra HD 1:8 Splitter for HDMI units, but also to combine the 4K Ultra HD 1:4 Splitter for HDMI and/or the 4K Ultra HD 1:2 Splitter for HDMI in the setup. Figure 1.
60Hz, 4:2:0 1:8 Splitter for HDMI 2 Basic Operation page | 7
Basic Operation Setting the Switching Mode Out 2 Out 6 FAST SWITCHING TECHNOLOGY Fast Switching Technology Fast Switching Technology (FST) is a Gefen software implementation for HDMI products. FST was created to improve the lengthy HDMI authentication process, based on the HDMI and HDCP specifications. FST provides quicker audio/video source switching and greatly improves the overall audio/ Out 3 Out 7 video system behavior and performance when more than one HDTV display is used in the system setup.
Basic Operation Setting the Switching Mode Using Slow Mode Out 4 mode, the 4K Ultra HD 1:8 Splitter for HDMI will follow Outthe 8 When set to slow switching standard authentication process, based on the HDMI and HDCP specifications. Slow mode is recommended when the source does not support multiple devices. 1. Disconnect the power supply from the splitter. 2. Set the FST switch to the Slow (down) position. Fast Slow Slow position FST 4K Ultra HD 1:8 Splitter for HDMI 2ch Multi-ch Audio 3.
Setting the Audio Channel Mode Basic Operation Out 3 Out 7 The 4K Ultra HD 1:8 Splitter for HDMI features a switch that will switch between 2-channel and multichannel audio output. Information In order for the audio channel mode to be selected, the EDID switch must be set to the Int position. If the EDID switch is set to the Ext position, then the Audio switch will have no effect on the audio output OutSee 4 Setting the EDID Mode (page 12) for more information. signal.
Basic Operation Out 4 Out 8Mode Setting the Audio Channel Using Multichannel Audio Use this audio mode when the connected displays (and/or other sink devices) are capable of multichannel audio. 1. Disconnect the power supply from the splitter. 2. Set the EDID switch Fast to the Int (up) position. 3. Set the Audio switch to the Multi-ch (down) position. Slow FST 4K Ultra HD 1:8 Splitter for HDMI 2ch Multi-ch Multi-ch position Audio Int Ext Int position EDID Power 4.
Basic Operation Setting the EDID Mode Out 3 Out 7 The 4K Ultra HD 1:8 Splitter for HDMI features EDID Management. Before the source can send video and/or audio to the display (sink), the source reads the EDID (Extended Display Identification Data) from the display (sink) devices connected to the splitter. The EDID contains information about what type of audio/video data that the source can send to each output device.
Setting the EDID Out 6Mode Basic Operation Out 2 Table 2.
60Hz, 4:2:0 1:8 Splitter for HDMI 3 Appendix page | 15
Appendix Surface Mount Instructions The 4K Ultra HD 1:8 Splitter for HDMI should be mounted vertically in a wall or cabinet with wood/drywall screws as shown in the diagram above. There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for insertion and retraction of cables at the HDMI connectors. For installation on a drywall surface, use a #6 drywall screw.
Appendix Firwmare Upgrade Procedure The following items are required to update firmware: • GefenToolBox 4K Ultra HD 1:8 Splitter for HDMI • Computer (Mac or PC) • USB-to-Mini-USB cable • Firmware file 1. Download the firmware from the Gefen Web site. 2. Extract the firmware file from the .ZIP file. 3. Power-Off the 4K Ultra HD 1:8 Splitter for HDMI. It is unnecessary to disconnect any HDMI cables from the splitter during the update process.
Appendix Specifications Supported Formats Resolutions (max.
*Preferred 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.
