Manual

page | 9
Using Slow Mode
When set to slow switching mode, the 4K Ultra HD 1:8 Splitter for HDMI will follow the
standard authentication process, based on the HDMI and HDCP specications. Slow mode
is recommended when the source does not support multiple devices.
1. Disconnect the power supply from the splitter.
2. Set the FST switch to the Slow (down) position.
3. Reconnect the power supply to the splitter.
If the FST switch is moved from the Fast position to the Slow position while the
splitter is powered, then power-cycle the splitter by disconnecting and reconnecting
the power supply in order for the change to take effect.
4K Ultra HD
1:8 Splitter
for HDMI
Out 1
Out 2
Out 3
Out 4
Out 5
Out 6
Out 7
Out 8
In
Power
5V DCUSB
Int
Ext
EDID
Audio
FST
2ch
Multi-ch
Fast
Slow
Basic OperationBasic Operation
Setting the Switching Mode
Slow position