080p Scaler GTV-HDMI-1080PS User Manual www.gefentv.
ASKING FOR ASSISTANCE Technical Support: Telephone Fax (818) 772-9100 (800) 545-6900 (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefentv.com support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Gefen TV 1080p HDMI Scaler is a trademark of Gefen Inc. © 2008 Gefen Inc.
CONTENTS 1 Introduction 2 Operation Notes 3 Panel Descriptions 4 Features 5 Connecting And Operating The 1080p HDMI Scaler / Operating The 1080p HDMI Scaler 6 1080p HDMI Scaler Configuration 11 Specifications 12 Warranty
INTRODUCTION Congratulations on your purchase of the 1080p HDMI Scaler. Your complete satisfaction is very important to us. Gefen TV Gefen TV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you find your solutions.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 1080P HDMI SCALER • The 1080p HDMI Scaler will cross convert between digital and analog audio formats (please see note 1 on page 5 for additional information). • Compatible with all HDMI and DVI* displays.
PANEL DESCRIPTIONS Front Panel 5V DC Power Input Power Status LED HDMI Mono-Lok Input IR Sensor Analog Stereo Audio Input S/PDIF (Optical) Audio Input Back Panel S/PDIF (Optical) Audio Output Analog Stereo Audio Output OSD Menu Button HDMI Mono-Lok Output 3 Menu UP Button Menu DOWN Button
FEATURES Features • Digital Input is format-converted and pixel re-scaled on the outputs • Dual high-quality scaling engines • Dual 3D motion video adaptive deinterlacers • DVI/HDMI/HDCP compliant input; Operates up to 165 MHz (UXGA @ 60Hz) • Automatic 3:2 pull-down & 2:2 pull-down detection and recovery • High-performance framerate conversion engine • Proprietary Advanced Color Engine technology gives: Brilliant and fresh color, intensified contrast and details, vivid skin tones, sharp edges,
CONNECTING AND OPERATING THE 1080P HDMI SCALER How to Connect the 1080p HDMI Scaler 1. Connect the HDMI source to the 1080p HDMI Scaler using the supplied HDMI cable. 2. Connect an optional external audio source to either the TOSLINK digital audio input or the stereo mini-jack input using user supplied cables. 1 NOTE : The 1080p HDMI Scaler will cross convert between some digital and audio formats. All audio outputs (HDMI, digital TOSLINK, and analog stereo mini-jack) will be active.
1080P HDMI SCALER CONFIGURATION Entering the Menu System Pressing the Menu button on the front panel will display the GUI (graphical user interface) for adjustment options. The GUI is overlaid onto the outgoing video to the display. Therefore, the source must be outputting a compatible resolution for viewing on the display. If video is not visible on the display, the GUI will also fail to be displayed. To correct this, please reset the unit by following the steps below follow the steps below. Reset 1.
80P HDMI SCALER CONFIGURATION VIDEO Picture Mode Preset and user configurable settings for different viewing scenarios. Preset settings will not allow user adjustment. Only the USER option will allow customized video settings. The USER settings are saved.
1080P HDMI SCALER CONFIGURATION NR (Noise Reduction) NR is not used for digital HDMI video. COLOR Color Tone Sets the color for the appearance of white. Only the USER option will allow customized settings. The USER settings are saved.
1080P HDMI SCALER CONFIGURATION OSD (ON SCREEN DISPLAY) H-Pos (Horizontal Position) Adjusts the OSD’s horizontal position on the screen. Options: • Adjusts in increments of 1 on a scale of 1 to 100 (default is 50) V-Pos (Vertical Position) Adjusts the OSD’s vertical position on the screen. Options: • Adjusts in increments of 1 on a scale of 1 to 100 (default is 50) Time Out Adjusts the amount of idle time before the OSD is automatically exited.
1080P HDMI SCALER CONFIGURATION Sound Select general audio output function Options: • On - Use selected audio source (default) • Mute - No sound output INFORMATION This menu will allow the user to view general information. There are no configurable options in this menu.
SPECIFICATIONS Digital Video Amplifier Bandwidth ............................................................ 165 MHz Input DDC Signal ......................................................................... 5 Volts p-p (TTL) Input Video Signal .............................................................................. 1.2 Volts p-p Single Link Range ..................................................................... 1080p/1920x1200 Input/Output HDMI Connectors ........................................
