User's Manual

13
Network Name
(SSID)
A SSID is referred to a network name because essentially it is a
name that identifies a wireless network.
Multiple SSID 1~6
A multiple SSID is referred to a network name because
essentially it is a name that identifies a wireless network.
Broadcast Network
Name(SSID)
Enable
: This wireless AP will broadcast its SSID to stations.
Disable
: This wireless AP will NOT broadcast its SSID to
stations. If stations want to connect to this wireless AP, this AP’s
SSID should be known in advance to make a connection.
BSSID
Shows the MAC address of the device.
Frequency (Channel)
Select Channel 1~13 or Auto Select from the pull-down menu.
Wireless Distribution System(WDS)
WDS Mode
Select the mode from the pull-down menu, Disable, Lazy Mode,
Bridge Mode or Repeater Mode.
HT Physical Mode
Operating Mode
Select Mixed Mode or Green Field. Default setting is Mixed
Mode.
Channel Band Width
Select 20 or 20/40, default setting is 20/40.
Guard Interval
Select Long or Auto, default setting is Auto.
MCS
Default setting is Auto. Or select form the pull-down menu 0~15,
32 or Auto.
Reverse Direction
Grant(RDG)
Select Disable or Enable this function, default setting is Enable.
Extension Channel
Default setting is 2452MHz (Channel 9).
Aggregation MSDU
(A-MSDU)
Select Disable or Enable, default setting is Disable.
Auto Block ACK
Select Disable or Enable, default setting is Enable.
Decline BA Request
Select Disable or Enable, default setting is Disable.
Other
HT Tx Stream
Select 1 or 2 form the pull-down menu.
HT Rx Stream
Select 1 or 2 form the pull-down menu.
Apply
Click to save and apply the current settings.
Cancel
Click to discard the current settings.