User's Manual

18
WPA Algorithms: Select TKIP or AES for the WPA Algorithms.
Pass Phrase
: Pass Phrase serves as a password. Users may key in 8 to
63 characters string if you select Passphrase to set the passwords or
leave it blank, in which the 802.1x Authentication will be activated.
Make sure the same password is used on client's end.
WPA2
WPA Algorithms: Select TKIP, AES or TKIP/AES for the WPA
Algorithms.
Pre-Authentication: Select Enable or Disable to execute this
function .This function only valid under WAP2-RADIUS
authentication. The two most important features beyond WPA to
become standardized through 802.11i/ WPA2 are: pre-authentication,
which enables secure fast roaming without noticeable signal latency.
Pre-authentication provides a way to establish a PMK security
association before a client associates. The advantage is that the client
reduces the time that it's disconnected to the network.
Radius Server: RADIUS is an authentication, authorization and
accounting client-server protocol. The client is a Network Access
Server that desires to authenticate its links. The server is a server that
has access to a user database with authentication information.
IP Address: Enter the RADIUS Server’s IP Address provided by
your ISP.
Port: Enter the RADIUS Server’s port number provided by your ISP.
The default is 1812.
Shared Secret: Enter the password that the device shares with the
RADIUS Server.