User's Manual

5. Ensure your TCP/IP settings are correct.

Using DHCP

• To use DHCP, select Obtain an IP Address automatically. This is the default Windows

setting. Using this is recommended. By default, the Wireless Device will act as a DHCP

Server.

• Restart your PC to ensure it obtains an IP Address from the Wireless Device.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured, check with your network administrator before making the

following changes.

• In the Default gateway field, enter the Wireless Device's IP address and click OK. Your

LAN administrator can advise you of the IP Address they assigned to the Wireless Device.

• If the DNS Server fields are empty, select Use the following DNS server addresses, and

enters the DNS address or addresses provided by your ISP, then click OK.

Internet Access

To configure your PCs to use the Wireless Device for Internet access:

• Ensure that the DSL modem, Cable modem, or other permanent connection is functional.

• Use the following procedure to configure your Browser to access the Internet via the LAN,

rather than by a Dial-up connection.