User's Manual

Wireless Station Configuration

• This section applies to all Wireless stations wishing to use the Wireless Device's Access

Point, regardless of the operating system that is used on the client.

• To use the Wireless Station with Wireless Device, each Wireless Station must have

compatible settings, as follows:

Mode

The mode must be set to Infrastructure.

SSID (ESSID)

This must match the value used on the Wireless Device. The default

value is Untitled.

Note! The SSID is case sensitive.

WEP

By default, the security setting on the Wireless Device is Disabled.

• If security setting remains disabled on the Wireless Device, all

stations must have it disabled.

• If security setting is enabled on the Wireless Device, each station

must use the same settings as the Wireless Device.

WPA

WPA2 (AES)

WPA2 Mixed

WPA (TKIP/AES)/ WPA2 (AES)/ WPA2 Mixed: If one of these

securities is enabled on the Wireless Device, each station must use the

same settings as the Wireless Device. If there is no security is enabled on

the Wireless Device, the security of each station should be disabled as

well.

Note: By default, the Wireless Device will allow both 802.11b and 802.11g connections.