HDMI To Composite/S-Video Scaler GTV-HDMI-2-COMPSVIDS User Manual www.gefentv.
PAGE TITLE Or atissequis ex er si eniamcortie vulluptatue delit veliqui sciliquis num volum zzril in eugait iliquis ciliquat. Olobore magnis nullaore consed DIP elestrud exerilis nons dignismodit dion et am quatum aut ut vullaor sum incinim zzrilla facil ut ullum incillamcons dolortio euis ate del dolutetue tate dolor sumsan venim nulla feugiat pratum zzrit augait ilit praessis at. Ut vel ut vel exercidunt alit adio er ing erostrud essecte feum velis el iriusci psustrud exerci bla facidunt do conseniat.
ASKING FOR ASSISTANCE Technical Support: Telephone Fax (818) 772-9100 (800) 545-6900 (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday Pacific Time. Write To: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. HDMI To Composite/S-Video Scaler is a trademark of Gefen Inc.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The 6 Hdmi To Composite/S-Video Scaler 7 Specifications 8 Warranty
INTRODUCTION Congratulations on your purchase of the HDMI To Composite/S-Video Scaler. Your complete satisfaction is very important to us. GefenTV GefenTV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you find your solutions.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE HDMI TO COMPOSITE/S-VIDEO SCALER • HDMI To Composite/S-Video Scaler converts 480i/p, 576i/p, 720p, 1080i/p to either NTSC 480i or PAL 576i. • The HDMI To Composite/S-Video Scaler will cross convert between some digital audio formats. Both the digital and analog audio outputs are active at all times. The HDMI To Composite/S-Video Scaler will not, however, downmix multi-channel digital audio formats to 2 channel analog stereo.
FEATURES Features • HDMI to Composite / S-Video conversion plus scaling • HDMI pass-through • Supports 480i to 1080p HDMI input resolutions • Outputs 480i / 576i signal for Composite/S-Video • Supports both NTSC and PAL formats Package Includes (1) HDMI To Composite/S-Video Scaler (1) 6 Foot HDMI Cable (M-M) (1) 5V DC Power Supply (1) User’s Manual D
PANEL LAYOUT Front Panel 1 2 3 4 Back Panel 5 6 7 8 O 9
PANEL DESCRIPTIONS 1 Stereo Analog Audio Output 2 RCA stereo analog audio outputs. Connects to the display or a audio Receiver. Only 2 channel LPCM from the HDMI input can be passed to these outputs. Multi-channel bit-stream such as Dolby Digital will not be passed to this output. 2 Composite Analog Video Output RCA composite video output. Connect to a composite input on a television. 480i and 576i are the only resolution output options. 3 S-Video Analog Video Output S-Video video output.
SENDER PANEL LAYOUT Front Panel Back Panel L
SENDER PANEL DESCRIPTIONS 1 HDMI To Composite/S-Video Scaler HDMI To Composite/S-Video Scaler U
RECEIVER PANEL LAYOUT Front Panel Back Panel M
RECEIVER PANEL DESCRIPTIONS 1 HDMI To Composite/S-Video Scaler HDMI To Composite/S-Video Scaler V
CONNECTING AND OPERATING THE HDMI TO COMPOSITE/S-VIDEO SCALER How to Connect the HDMI To Composite/S-Video Scaler 1. Connect the HDMI source to the HDMI To Composite/S-Video Scaler’s HDMI input using the supplied HDMI cable. 2. Connect the display to the HDMI To Composite/S-Video Scaler’s composite or s-video outputs using user supplied cables. 3. Connect the HDMI To Composite/S-Video Scaler’s stereo analog audio output to the display or audio Receiver.
1.
IR CODE CONFIGURATION 1.
1.
NETWORK CABLE WIRING DIAGRAM Gefen has specifically engineered their products to work with the TIA/EIA-568-B specification. Please adhere to the table below when field terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. Pin Color 1 Orange / White 2 Orange 3 Green / White 4 Blue 5 Blue / White 6 Green 7 Brown / White 8 Brown 12345678 CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types.
RACK MOUNT INSTALLATION Rack mount ears are provided for installation of this unit into a 1U rack mount space. 1. 2. 3. 4. Locate the side screws on the unit. Remove the front 2 screws that are located closest to the front of the unit. Using the removed screws, screw the rack mounting bracket into the unit. Repeat the procedure on the opposite side of the unit.
MOUNTING PLATE INSTALLATION Mounting Plate Installation 1 Remove the rubber feet covering the screws off the bottom of the unit. Remove the screws. 2 3 Line up the mounting plates and screw it on to the unit.
WIRING DIAGRAM F
SPECIFICATIONS Input Video Signal .................................................................................... 1.2V p-p Input Sync Signal ............................................................................... 5V p-p (TTL) Horizontal Frequency Range ................................................................ 15-70 KHz Vertical Frequency Range ................................................................... 30-170 KHz Video In/Out .....................................................
H
*ma-HDMI-2-COMPSVIDS* Rev X1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefen.com fax: 818-772-9120 support@gefen.