User manual

1 Power Switch

This switch will toggle the main power on and off.

2 Source Selector Button

This button will cycle through the available input video sources. The cycle is

outlined below:

3 Channel Selection Button

This button will cycle through the available radio channels. There are 4 channels

to choose from. This feature is useful when a certain channel is oversaturated

and another needs to be used. Changes made on this unit will automatically be

reﬂ ected on the opposite unit.

4 Reset Button

These button will restore the units to factory defaults.

5 3.5mm Mini-Jack Audio Input

This input will accept a 3.5mm mini-jack for analog stereo audio transmission.

This input will accept a 3.5mm mini-jack audio device for analog audio. Audio

from this input will be transmitted to the receiver.

6 VGA Video Input

This input will accept a single VGA video source for transmission to the receiver

at the remote location.

7 Component Video Input

This input will accept a single Component video source for transmission to the

receiver at the remote location.

8 S-Video Input

This input will accept a single S-Video source for transmission to the receiver at

the remote location.

9 Composite Input

This input will accept a single Composite video source for transmission to the

receiver at the remote location.

10 12V DC Power Input

This input will receive power from one of the included 12V DC power supplies.

VGA Component S-Video Composite

SENDER PANEL DESCRIPTIONS