Datasheet

ELECTRICAL / MECHANICAL DATA
Model
mm
Electrical stroke (E.S.)
Independent linearity
Max. dimensions (A)
Repeatability
Hysteresis
mm
mm
mm
150 175 200 225 250 300 350 360 400 450 500 550 600 650 700 750 800 850 900
Model
≤ ± 0,04%F.S. (Min. ± 0,090 mm)
950
1000
1100
1200
1250 1300 1400
1500
1301007550
Model + 154
≤ 0,01 (typical)
≤ 0,02 (typical)
Sampling time
ms
1 1,5 2 3
ANALOG OUTPUT
The ONP1-A magnetostrictive transdu-
cers provide a direct voltage or current
analogue output proportional to the
magnetic cursor’s position.
Since the output is direct, no signal elec-
tronic processing is required if interfaced
with controllers or measurement instru-
ments.
0,1...10,1 V d.c.
4...20 mA
ELECTRICAL CONNECTIONS
ORDER CODE
Position
transducer
O N P 1 A
0 0 0 0 X 0 0 0 X 0 0 X 0 X X
GEFRAN spa reserves the right to make aesthetic or functional changes at any time and without notice
Note:
Make a connection as close as possible to transducer
2
1
3
PIN FUNCTION
1 Power supply -
2 Output
3 Power supply +
Cable Shield
(must be connected to the panel side, too)
PIN FUNCTION
1 Output
2 GND Output
3 n.d.
4 Power supply -
5 Power supply +
1
3
2
schield
1
5
2
3 4
Analog output A
Connector
4 pin connector output
DIN 43650 ISO4400
M
5 pin connector output
M12
A
Output
0,1...10,1 V d.c. 1 cursor only for direct output W
4...20mA 1 cursor only for direct output E
Model
ONP1-A-M
ONP1-A-A