User`s guide

39
English
Appendices
6. Select the “Change” button under the “Monitor” tab.
7. Click on “Show all devices”. Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
8. Verify that the resolution setting of the monitor display is
lower than or equal to SXGA+ (1400 x 1050). (*)

If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. Example: [Fn]+[F4]

If you experience difculty changing resolutions or your monitor
freezes, restart all equipment including the projector.
The screen of the Notebook or PowerBook computer is not
displaying your presentation

If you are using a Notebook PC
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s manual for detailed
information.
Image is unstable or ickering

Use “Phase” to correct it. See page 32 for more information.

Change the monitor color setting on your computer.
Image has vertical ickering bar

Use “Frequency” to make an adjustment. See page 32 for more
information.

Check and recongure the display mode of your graphic card to
make it compatible with the projector.
Acer

[Fn]+[F5]
Asus  [Fn]+[F8]
Dell

[Fn]+[F8]
Gateway  [Fn]+[F4]
Mac Apple:
System Preference  Display  Arrangement  Mirror
display
IBM/Lenovo  [Fn]+[F7]
HP/Compaq

[Fn]+[F4]
NEC

[Fn]+[F3]
Toshiba  [Fn]+[F5]
(*) The resolution
XGA (1024 x 768) is
recommended for
computer signal.