SDS

OSHA 29 CFR 1910.1017
This compound may contain trace levels (<0.001%) of VCM. Under normal working conditions with
adequate ventilation, neither the OSHA-PEL of 1 ppm (8-hr TWA), nor the OSHA-STEL (5.0 ppm) should
be exceeded. The workplace should be monitored and if the level exceeds any of the PELs or action
levels, refer to 29 CFR 1910.1017.
IMPORTANT
The information and data herein are believed to be accurate and have been compiled from sources believed
to be reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use,
storage and handling of the product in compliance with applicable federal, state, and local laws and
regulations.
PREPARED BY: Roland Hoffman
June 1, 2015
REVISION NUMBER: 2.75
REVISED BY: Roland Hoffman June
22, 2015
The date and recommendations presented herein are based upon a review of HOFFMAN PLASTIC
COMPOUNDS, INC. files, published SDS’s, and standard toxicological reference sources. HOFFMAN
PLASTIC COMPOUNDS, INC. makes no guarantee or warranty, either expressed or implied as to the
accuracy or completeness of these data and recommendations. This information solely relates to the
material designated on this SDS, therefore the data contained in this SDS may not be valid towards the
combination with any other materials nor within any process.
16. Other Information
15. Regulatory Information (continued)