SDS

Hoffman Plastic Compounds
June 1, 2015
SDS
Page 5 of 11
HPC-SDS v2.58 – 6/10/15
Compounded PVC is in inert material in its normal state in either pellets, or granules. All
the ingredients and / or components listed below are encapsulated within the PVC matrix:
Component
% Weight
CAS #
Additional Information
Polyvinyl Chloride Polymer
45% - 80%
9002-86-2
Inert Fillers
0% - 40%
1317-65-3
Limestone
Heat Stabilizers
3% - 10%
Mixture
Organometallic compounds of
barium and/or Calcium Zinc
Plasticizers
0% - 60%
Mixture
High molecular weight esters
Colorants
0% - 5%
Mixture
Organic & Inorganic colorants
5 Inhalation
5.1. No adverse effects anticipated under normal conditions if adequately
ventilated. However, if exposure occurs, remove the exposed individual to
fresh air. Obtain medical attention immediately if irritation persists.
6 Skin Contact
6.1. No adverse effects anticipated under normal conditions. Flush with water to
remove material from skin. Obtain medical attention if irritation persists.
7 Eye Contact
7.1. In the event of eye irritation, flush eyes with water for at least 15 minutes. Do
not rub eyes. Obtain medical attention if irritation persists.
8 Ingestion
8.1. No effect expected. If large amounts are ingested, seek medical attention.
Only induce vomiting at the instructions of a physician.
3. Composition / Information on Ingredients
4. First Aid Measures