SDS

Hoffman Plastic Compounds
June 1, 2015
SDS
Page 13 of 11
HPC-SDS v2.58 – 6/10/15
OSHA 29 CFR 1910.1017
This compound may contain trace levels (<0.001%) of VCM. Under normal working conditions
with adequate ventilation, neither the OSHA-PEL of 1 ppm (8-hr TWA), nor the OSHA-STEL (5.0
ppm) should be exceeded. The workplace should be monitored and if the level exceeds any of the
PELs or action levels, refer to 29 CFR 1910.1017.
IMPORTANT
The information and data herein are believed to be accurate and have been compiled from sources
believed to be reliable. It is offered for your consideration, investigation and verification. Buyer
assumes all risk of use, storage and handling of the product in compliance with applicable federal,
state, and local laws and regulations.
PREPARED BY: Roland Hoffman
June 1, 2015
REVISION NUMBER: 2.75
REVISED BY: Roland Hoffman June
22, 2015
The date and recommendations presented herein are based upon a review of HOFFMAN PLASTIC
COMPOUNDS, INC. files, published SDS’s, and standard toxicological reference sources.
HOFFMAN PLASTIC COMPOUNDS, INC. makes no guarantee or warranty, either expressed or
implied as to the accuracy or completeness of these data and recommendations. This information
solely relates to the material designated on this SDS, therefore the data contained in this SDS may
not be valid towards the combination with any other materials nor within any process.
16. Other Information
15. Regulatory Information (continued)