Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 Sample Application
- 3 Operating Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
BGS5 Hardware Interface Overview
5.3 Reference Equipment for Type Approval
33
BGS5_HID_v00.341 2013-09-23
Confidential / Preliminary
Page 32 of 41
5.3 Reference Equipment for Type Approval
The Gemalto M2M reference setup submitted to type approve BGS5 (including a special ap-
proval adapter for the DSB75) is shown in the following figure
1
:
Figure 9: Reference equipment for Type Approval
1. For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-
sen to connect the evaluation module directly to the GSM test equipment instead of employing the SMA
antenna connectors on the BGS5-DSB75 adapter as shown in Figure 9. The following products are
recommended:
Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)
(for details see see http://www.hirose-connectors.com/ or http://www.farnell.com/
Aeroflex Weinschel Fixed Coaxial Attenuator Model 3T/4T
(for details see http://www.aeroflex.com/ams/weinschel/pdfiles/wmod3&4T.pdf)
Antenna
GSM / GPRS
Antenna with 1m cable
ASC0
PC
Power
supply
GSM / GPRS
Base station
DSB75
Audio test system
Handset
ASC1
USB
Codec adapter
DAI
Analog
Audio
Approval adapter for
DSB75
SMA
Evaluation module
BGS5
USB
Evaluation module
BGS5
SIM card
Audio