User's Manual
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
ELS61-AUS Hardware Interface Description
2.2 RF Antenna Interface
52
ELS61-AUS_HID_v00.031 2016-06-03
Confidential / Preliminary
Page 42 of 102
RF Power @ ARP
with 50Ω
Load
UMTS 2100 Band I +23.5 dBm
UMTS 850 Band V +23.5 dBm
UMTS 900 Band VIII +23.5 dBm
1. No active power reduction implemented- any deviations are hardware related.
2. Applies also to UMTS/LTE Rx diversity antenna.
Table 8: RF Antenna interface UMTS/LTE (at operating temperature range
1
)
Parameter Conditions Min. Typical Max. Unit