User's Manual
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
ELS61-AUS Hardware Interface Description
5.3 Reference Equipment for Type Approval
94
ELS61-AUS_HID_v00.031 2016-06-03
Confidential / Preliminary
Page 93 of 102
5.3 Reference Equipment for Type Approval
The Gemalto M2M reference setup submitted to type approve ELS61-AUS (including a special
approval adapter for the DSB75) is shown in the following figure
1
:
Figure 54: Reference equipment for Type Approval
1. For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-
sen to connect the evaluation module directly to the UMTS test equipment instead of employing the SMA
antenna connectors on the ELS61-AUS-DSB75 adapter as shown in Figure 54. The following products
are recommended:
Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)
(for details see http://www.hirose-connectors.com/ or http://www.farnell.com/
Aeroflex Weinschel Fixed Coaxial Attenuator Model 3T/4T
(for details see http://www.aeroflex.com/ams/weinschel/pdfiles/wmod3&4T.pdf)
Antenna
Ma i n
Antenna
ASC0
PC
Power
Suppl y
LTE / UMTS
Base Station
DSB75
ASC1
USB
Approval adapter
for DSB75
SMA
USB
SIM Card
SMA
SMA
Rx diversity
Antenna
Evaluation module
ELS61
Evaluation module
ELS61
Top view
Bottom view